Please Submit a Separate Post-Processor Request For Each Machine.

Please include a signed copy of the Post Processor Creation/Modification Acknowledgement Form with the Post-Processor Creation Request Form and send them in via e-mail to [email protected] or via fax to (727) 442-9264.

Please check your email for a confirmation email containing your post request ticket number. If you do not receive the confirmation email within 15 minutes, please call the Technical Support Department at 727-489-0003 or [email protected].

Please make sure you send the following files with each post-processor modification request.

  1. The electronic copy of the machine's programming manual OR the complete list of G&M codes accepted by the machine, along with their descriptions (Should you not have this available, contact your machine dealer or the machine tool manufacturer).
  2. A working sample program that contains the start of the program, the end of the program, tool changes, examples of canned cycles, etc.

Download Post-Processor Creation/Modification Acknowledgement Form

Post Request Forms for 3-Axis Mill/Router, Laser, Plasma, Waterjet, Lathe, and Wire EDM

3-Axis Mill/Router

Download Post-Processor Request Form for Mill/Router Machines (up to 3-axis)

Laser, Plasma, Waterjet (LPW)

Download Post-Processor Request Form for PW Machines (up to 3-axis)

2-Axis Lathe

Download Post-Processor Request Form for Lathe Machines (up to 2-axis)

Wire EDM

Download Post-Processor Request Form for Wire EDM Machines (up to 4-axis)

Post Request Forms for Multi-Axis Mill/Router

Multi-Axis Mill/Router

Download The Post-Processor Request Form for All Types of Multi-Axis (4-Axis and 5-Axis) Mill/Router Machines

On the last page of the post-processor request form, you are asked to enter the location of the center of rotation.
Below are the different guides that we have created to show how you can find this location based on your machines' kinematic configurations.

5-Axis Table-Table with Trunnion Unit

Download How-To-Find Center of Rotation Document for Machines with Trunnion Units Can Tilt to 90 Degrees in Both Directions

Download How-To-Find Center of Rotation Document for Machines with Trunnion Units Can Tilt to 90 Degrees Only in One Direction

5-Axis Table-Table with Tilt-Rotary

Download How-To-Find Center of Rotation Document

Still not sure how to find the center of rotation?
This video explains the whole process step by step.

5-Axis Head-Head

Download How-To-Find Center of Rotation Document

Still not sure how to find the center of rotation?
This video explains the whole process step by step.

4-Axis with Tilting Head or 5-Axis Head-Table

Download How-To-Find Center of Rotation Document

5-Axis Head-Head with Nutating Axis

Download How-To-Find Center of Rotation Document

5-Axis Table-Table with Nutating Axis

Download How-To-Find Center of Rotation Document for Machines with a 45-degree Nutating
Axis

For Machines with a nutating axis orientated at a different angle, please contact technical support
Phone: (727) 489-0003
Email: [email protected]

5-Axis Head-Table with Nutating Axis

Download How-To-Find Center of Rotation Document for Machines with a 45-degree Nutating
Axis

For Machines with a nutating axis orientated at a different angle, please contact technical support
Phone: (727) 489-0003
Email: [email protected]

Post Request Forms for Mill-Turn

Mill-Turn

Download The Post-Processor Request Form for All Types of Mill-Turn Machines

On page 4 of the post-processor request form, you are asked to enter the orientation and the location of the center of rotation (if applicable)
Below are the different guides that we have created to show how you can find this location based on the orientation of the milling spindle.

Mill-Turn with Z-Axis Oriented Milling Spindle

Download How-To-Find Center of Rotation Document

Mill-Turn with X-Axis Oriented Milling Spindle

Download How-To-Find Center of Rotation Document