This issue pertains to a missing index in a function call, this type
of error is caused when some part of the internal workings of the
program look...
To reinstall Predator CNC Editor and/or Virtual CNC:
* Left-Click on "My Computer"
* Then Left-Click on "BobCadCam Data"
* Now Left-Click o...
If the Predator Backplot window does not pop-up then start from Step
1.
If the Predator Backplot window does pop-up but it does not run move
to ...
In order to output the header for predator backplot the following
lines must be set up in the post processor.
MILL
0. File header
"(BEGIN PREDA...
If you are receiving an Invalid Handle click here to run the Trouble
Shooter. [1]
Keywords: Invalid handle com port com-port error
Links:
-----...
If your machine does not read the file on your disc or via RS-232
communication click here to run the Trouble Shooter. [1]
Keywords:
File dis...
Below is a video on how to add custom stock and fixtures into the
Editor for backplot.
Keywords:
Fixtures fixture stock custom customization customiz...
Predator Reverse Post Manual.
The attached file is the manual for editing reverse post processors
used for the simulator and editor backplot.
Keyword...
This is caused by the incorrect template being set in Predator
Editor.
BOBCAD-CAM:
* Open BobCAD-CAM
* Click Modules at the top of the scree...
Attached below is a .PDF which explaining how to Set up the tool
changes in the predator editor, enabling the next tool change button.
Keywords:
sett...
Here is the definition for a nonmonotnous arc move from the Haas
website
http://atyourservice.haascnc.com/faaqs/non-monotous-alarm-on-a-cnc-machine-to...
If you have the upgraded Predator Editor and you want to backplot
absolute arc moves, you will have to edit the Reverse Post. Go to the
Predator RPost...
Both the upgraded predator editor and Virtual CNC can provide cycle
time for given programs.
NOTE: The editor will provide cycle time for any give...
The attached file is for the pin-out for communicating via RS-232 from
Predator to a Burny control.
To set the file extension in BobCAD to allow the Gerber to see the
code, please follow the instructions below.
1. Right Click Milling Jobs and s...
The Buffer Overrun error is caused by the code sending to the
controller too fast. To resolve this you will need to open up your
Predator Editor.Once ...